Automatic Flocculant Dosing System for Water Treatment

Low Price Automatic Flocculant Dosing System for Water Treatment Manufacturers and Suppliers in China.

1. Product Introduction of Automatic Flocculant Dosing System for Water Treatment

Tracer dosing device indirectly measures the concentration of chemicals in circulating water by measuring the concentration of tracer, so as to achieve the purpose of automatic analysis and dosing. At the same time, through expanding the installed automatic monitoring instruments such as PH meter, ORP meter, conductivity meter, turbidity meter, etc., relevant signals can be collected to DCS to monitor the whole process of circulating water system.
operating principle
The tracer adopts advanced fluorescence tracer technology, which firstly traces the corrosion and scale inhibitors. After the reagent is added, when circulating water flows into the water sample collector through the bypass, the tracer reagent is activated by the monochromatic light of the instrument, producing fluorescence, and the fluorescence intensity has a linear relationship with the concentration of the reagent. The instrument adopts a stable low-power light source and a high-precision photoelectric converter, and the dimming light is reflected to the photoelectric converter to generate a weak current, which is amplified by a high-power amplifier and processed by a single-chip microcomputer and then outputs two 4-20mA current signals: one 4-20 mA current signal is sent to the tensile machine, which can enter the machine for dialogue and realize automatic supervision; Another 4-20 mA current signal is used to control the dosing pump. According to the manually set control value, the instrument can use PID to output control, and when the error is large, it can be adjusted by fuzzy algorithm to eliminate PID saturation integral phenomenon. When the error is getting smaller, the improved PID algorithm is used to adjust, and some features of the controlled object can be automatically learned and memorized during the adjustment to optimize the control effect. Its output control signal directly controls the dosage of dosing pump, and the actual dosage and the consumption of chemicals in circulating water reach a dynamic balance. At this time, the active ingredients in the medicine can be monitored by the controller at any time, so as to complete automatic dosing.

2.Product Parameter (Specification) of Automatic Flocculant Dosing System for Water Treatment

Features：
1. Through the principle of fluorescence tracing, no matter what state the system is in, the effective components of water treatment agent can be directly detected. The measurement error is less than plus or MINUS 0.1mg/1(1mg/1) and the control error is less than plus or MINUS 0.5mg/1(5mg/1).
2.BTSJ circulating water automatic dosing system has more obvious advantages in a system with multiple make-up water pipelines or sewage discharge that is not easy to control.
3. It is especially suitable for developing low-phosphorus and non-phosphorus formulations.
4. At the same time, it is convenient to upgrade the original non-automatic dosing, so that it can become fluorescence tracer dosing.

Application
The Automatic tracer dosing device is widely used in petrochemical industry,power industry and circulating water system.

3.Deliver,Shipping And Serving of Automatic Flocculant Dosing System for Water Treatment

4. FAQ

How to choose the products?
You can provide us your detail information.
Do you accept OEM?
Of course, we will make suitable products for you according to your requirements.
What is the delivery time?
It depends on order quantities. The delivery of parts and accessories is relatively fast about 1~3 days. But the customization is relatively slow, generally speaking, the delivery time will be within 4 to 6 weeks.
What is the equipment warranty?
All the equipment from my factory have one year warranty.
How to use the equipment ?
We will provide detailed illustrations to you.