China Lobe Pump Manufacturers, Suppliers, Factory

Dongkai is a leading China Industrial High Pressure Pump manufacturers. Industrial High Pressure Pump's operating principle: Reciprocation of plunger drives hydraulic oil, and hydraulic oil drives the diaphragm to reciprocate, so as to suck in and discharge the medium.

Dongkai quality Safety Relief Valve back Pressure Valve help to relieve excess pressure on the pump system or maintain pressure at a setted point. Safely relief valve is installed on the outlet pipeline of metering pump. When the system pressure becomes abnormal, safety relief valve protects metering pump from any damages. Back pressure valve shall be installed at the outlet of metering pump in order to reduce siphon and excess feeding, and ensure the metering accuracy of metering pump is not affected. When dosing point is lower than the outlet of metering. Each Valve is diaphragm type with 2-port design, which can be used both as safety relief and back pressure valve

Ammonia Dosing Pump's working Principle: The motor drives worm gear pair; through eccentric mechanism, rotary motion of the motor is transformed into reciprocation of slide bar. Reciprocating slide bar directly propels mechanical diaphragm to make cyclic deformation, so as to suck in and discharge the medium....

China advanced Sulfuric Acid Pump Factory. Sulphuric acid dosing is regularly used in industry。 This high-performance Sulfuric acid dosing pump is specially configured for safe and accurate dosing of sulphuric acid. Dongkai sulfuric acid dosing pump has a lots of models aiming at different on-site working conditions, different water medium, different medium temperature, different installation process and different water treatment capacity.

Dongkai is a leading China Industrial phosphate dosing pump manufacturers. The Industrial phosphate dosing pump is a metering pump, the pump capacity of which can be precisely adjusted in 0.2% increments, either manually or optionally with an electric actuator or control drive. The pump can adjust to shifting metering tasks with speed and dependability thanks to the integrated controller.

A Y-strainer, sometimes referred to as a wye strainer, is designed to mechanically remove solids and other particles from fluids. They are an essential component in numerous fluid control applications to ensure no down-stream component is affected by particles within the fluid.